About Transfer Service connection specifications

Question

Please telll me the following specifications for the Transfer Service?
1. JIS year
2. Socket buffer sizes
3. Transfer block length
4. Transfer block count
5. Data transfer method
6. Send multiplex level
7. Receive multiplex level

Answer

1. JIS year

The JIS year set in the [HULFT Transfer Hosts] is fixed at "83JIS".

2. Socket buffer size

Both the socket buffer size for data sending and socket buffer size for data receiving set in the [HULFT Transfer service] are fixed at "0".

3. Transfer block length

The transfer block length set in the [HULFT Transfer Send] is fixed at "0".

4. Transfer block count

The transfer block count set in the [HULFT Transfer Send] is fixed at "0".

5. Data transfer method

The setting value selected in the item [Strategy] in the [HULFT Transfer Service] settings is adopted.

6. Send multiplex level
7. Receive multiplex level

The Transfer Service multiplexes are fixed at "10" for both sending and receiveing, and the multiplexes cannot be changed.
Also, we are not planning to develop a feature to change the multiplexes at this time.

The following manual page also describes about the multiplexes.

= Remarks =
The number possible to send at the same time (send multiplicity) and the number possible to receive at the same time (receive multiplicity) is up to 10 for one HULFT Transfer service.

[HULFT Transfer Service]
https://www.hulft.com/help/en-us/HULFTSquare/Content/HULFT_Square/HS_Services/services_HULFT_Transfer.htm